Save Empire Earth

1. Log in to the browser.

For example - router Tp-link model TD-W8901G:
http://192.168.1.1
User:admin
pass:admin (default).

2. Make sure you have these options on your router: DMZ and Mac
If you don`t have a Mac and a DMZ, you can`t use this guide...

In Tp-link router:
Advanced Setup -> NAT -> DMZ

Interface Setup -> Wireless -> Mac address# 1:

3. DMZ -> IP type.

4. Mac address -> from your computer, type the mac address

(How to find mac address on your computer?: command line -> ipconfig/all ).

5. DHCP -> enabled (static IP).

off and turn on your computer and the router.

Sry for bad english.


GL&HF

Elfor

Thank you so much elfor.

Does it works with new ones

macsara wrote:Does it works with new ones

The DMZ protocol never changes, so 99% chance it will work.